Get 20% off your order and free US shipping! Use coupon code: TAKE20

x

Shop > Components > Axis360 Motor & Controller

Axis360 Motor & Controller

$399.99

Axis360 is a motion control system that can slide, pan, or tilt a camera for dynamic video and time-lapse photography. Axis360 is compact and lightweight, sets up easily, and is extremely versatile. Its powerful stepper motor moves at a wide range of speeds, fluidly or incrementally and will work with most DSLR and cinema cameras. Axis360 is run by the CineMoco Controller which includes a built in 6 hour rechargeable battery. Speed range in video mode is variable up to 110°/s. S-M-S (shoot-move-shoot) mode enables moves as small as 0.03° incrementally! The CineMoco Controller works with the Axis360 to enable smooth motor controlled movement.

This product is temporarily unavailable.

Videos

Specifications & Requirements

  • Required: Any camera that shoots digital video or stills.
  • Weight Limit: 11 lb (5 kg).
  • Controller records up to 6 hours in continuous mode and 24 hours in power saving mode.
  • An Axis360 and Controller is required for each axis of motion that you want to drive simultaneously.
  • You can combine multiple Axis360 units for 2 or 3 axis movements.
  • In a setup with an additional Axis360 and CineMoco Controller, controllers can be controlled individually or daisy chained together with a standard 3.5mm stereo cable for synchronized control.
  • Compatable with Dragonframe.
  • Video functions do not require a camera cable, and many cameras support time-lapse with a built-in intervalometer (no camera cable necessary). The Controller can control the camera shutter with camera cables that are available optionally online in our store HERE .

Features and Benefits:

  • Make smooth and repeatable moves for time-lapse, video, and stop motion projects.
  • Get precise shots with variable speeds up to 110°/sec and accurate to 0.1°.
  • 360° motorized pan or tilt allows for smooth, repeatable movement in any direction.
  • Software is open source and upgradable for future expansion and advancement.

Includes:

Axis360: A digital stepper motor that makes smooth and precise moves. It can be configured to pan a camera, tilt when used with the tilt kit, and slide when used with the slider. Axis360 can move any camera weighing less than 11 lb (5 kg)  with a standard 1/4"-20 mounting thread.

Cinemoco Controller: A compact motor controller. It controls super slow moves while firing synchronized time-lapse photos and quick moves for video. The controller works with most cameras and is used to trigger the shutter and power the motor. A controller is required for each axis of motion control that you want to drive simultaneously. The controller can be configured individually or daisy chained together with a standard 3.5mm stereo cable for synchronized control. Controllers have CineMoco software version 2.5. Instructions to update to the latest CineMoco software can be found HERE .

Sync Cable and Y Splitter: Allows you to control multiple Axis360 units from one Controller by syncing to multiple controllers.

Axis360 Motor&Controller

Cinetics © 2016. All Rights Reserved.
4407 Bee Caves Rd, Suite 422
Austin, TX 78746 USA
+1-512-686-6806

Made by Farm.Co