Happy 4th of July!! Get 20% off orders over $500 with coupon code JULYx
Slider Extension will add 32" to your Cinetics Slider bringing the length to a total of 64” with one extension and 96” with two extensions. Rails connect for a fluid, even slide or break down easily to fit in a backpack. Crafted from durable aircraft aluminum, these lightweight rails won’t fail you even on your wildest adventures. To use the Slider Extension with the Axis360 Pro, you will need additional belts. You must choose whether you want to add the 64" belt for one extension, or the 96" belt for two extensions under the drop-down option "Add belts for slider extension" on this page.
Axis360 is a digital stepper motor that can be used to slide, pan, or tilt a camera for dynamic video and time-lapse photography. It moves at a wide range of speeds, fluidly or incrementally. It will work with most DSLR and cinema cameras. Axis360 is run by the Controller which operates on CineMoco software and includes a built in 6 hour rechargeable battery. Speed range in video mode is variable up to 110°/s. S-M-S (shoot-move-shoot) mode enables moves as small as 0.03° incrementally! The Controller works with the Axis360 to enable smooth motor controlled movement
Axis360 is a motion control system that can slide, pan, or tilt a camera for dynamic video and time-lapse photography. Axis360 is compact and lightweight, sets up easily, and is extremely versatile. Its powerful stepper motor moves at a wide range of speeds, fluidly or incrementally and will work with most DSLR and cinema cameras. Axis360 is run by the CineMoco Controller which includes a built in 6 hour rechargeable battery. Speed range in video mode is variable up to 110°/s. S-M-S (shoot-move-shoot) mode enables moves as small as 0.03° incrementally! The CineMoco Controller works with the Axis360 to enable smooth motor controlled movement.
This manual slider is an ultra smooth rail track and cart system. The cart rolls on eight urethane coated bearings and has adjustable drag. Totaling 32" in length, the aluminum rails break down into four 16" segments. Outrigger legs enable setup on any terrain, and a center 3/8"-16 tripod mount allows height versatility. The slider may be moved manually or by using the Axis360 motor and CineMoco controller .
CineMoco is a powerful and versatile motion control system. CineMoco makes smooth repeatable moves for video, time-lapse, and moves on command for stop motion animation. It runs from open source software and includes a built in 6 hour rechargeable battery. Speed range in video mode is 0.3 - 14.5 cm/s. S-M-S (shoot-move-shoot) mode enables moves as slow as 0.000002 cm/s! CineMoco Controller works with the CineMoco and Axis360 motors.
This is the motor that drives CineMoco, a powerful and versatile motion control system. CineMoco makes smooth repeatable moves for video, time-lapse, and moves on command for stop motion animation. Equipped with the V Wheels and SkatesPlate, it can be used on SkateTrack. The CineMoco works best horizontally, but can also do inclines of up to 10 degrees.
You can purchase the update here for $0, you just have to pay for shipping your controller and we will get it back to you! The alternative to purchasing this update is to update the controller software yourself. This is an involved process, and we recommend that you send it to us so that we can do it in a flash. The update requires you to connect your controller to your computer with a micro USB cable to make the update. Please be gentle with the micro USB port on the controller, it is fragile. If you would like to do the update yourself, please download the latest CineMoco software version below and follow the included instructions.
CineSquid is a suction cup tripod system fit for Spider-man. It can securely attach your camera to contoured, multi-level surfaces. Field-tested with a 5 lb (2.2 kg) camera on the outside of a car at 80 MPH and with a 0.5 lb (0.2kg) camera on the outside of a plane at 200 MPH, this killer system won’t move while making your moving pictures. The triple redundant, rock-solid connection enables you to secure your camera to a window, a car, or nearly any smooth non-porous surface you can find! With CineSquid, amateur filmmakers can capture stunning, Hollywood-style camera shots, including: High-speed chase or automobile cruising scenes; Scenic or landscape video from a boat, train or any moving vehicle; Time-lapse photography with a rock-solid connection to any smooth surface
The Lynx Controller is a world class three axis camera motion controller. A cutting edge microcontroller and precision motor drivers are the heavy lifters, but the user interface makes quick setup and advanced control simple. The controller has a built in lithium ion battery that can run up to 3 hours continuously or up to 24 hours in power save mode, and it can be driven by the Lynx iOS and Android apps!!
Robotic motion control on wheels! Lynx Dolly is a versatile, portable table-top dolly that gives you the power of motion control at your fingertips. Time-lapse and slider shots can be set up and performed at the touch of a button with a simple, intuitive interface that does all the hard work for you. Lynx Dolly uses a powerful stepper motor that is accurate to a hundredth of a millimeter. Speed range in video mode is 0.3 - 14.5 cm/s. S-M-S (shoot-move-shoot) mode enables moves as slow as 0.000002 cm/s! It includes a built in 3 hour rechargeable battery. The dolly works best horizontally but can also do inclines of up to 10 degrees.
The Lynx Slider is a versatile video movement machine. Twenty four inch carbon fiber rails provide a smooth fluid motion at the touch of a finger, and rail extensions can be added to double the slider length to forty eight inches for long moves. The Lynx Slider is built with professional quality and durability in mind.
The Lynx Upgrade enables previous Cinetics motor control systems, Axis360 and CineMoco, to work with the new Lynx controller with an included adapter set. The Lynx controller is is a compact three axis motor controller. It features bluetooth technology and smartphone apps, save slots for custom programs, multiple keyframe capability, and cutting edge stepper motor drivers. But best of all is the simple and intuitive interface. The controller has a built in lithium ion battery that can run up to 3 hours continuously or up to 24 hours in power save mode.
Outrigger Leg is a lightweight slider leg made of strong and lightweight fiberglass reinforced polymer. The outrigger leg folds out in two simple moves to provide a stable lift and enable usage in almost any environment imaginable. And, the outrigger legs fold right back up and stows away for ultimate portability!
SkatePlate is designed for use with Cinetics products featuring the Cinetics Quick Connect. CineSkates attach to SkatePlate to form a killer video dolly, and CineSquids attach to form a solid suction mount. SkatePlate has a retractable quick-set-up design. Simply fold the three legs out and tighten the handles and SkatePlate locks in to a sturdy configuration. You can follow the easy-to-read illustrations found on the face of the SkatePlate to line up skates for straight rolls or curves and use the imprinted marking system for perfect alignment every time. SkatePlate can hold rigs up to 11 lb (5 kg).
SkateTrack is a 4' (1.2 m) long rail assembly breaks down into six 16” (40.6 cm) sections. This stable surface is designed specifically for V Wheels and SkatePlate. SkateTrack is lightweight and portable, so you can get flawless movement in any environment. It quickly breaks down to fit right in your bag, and the rails are expandable to reach whatever length you need to get that perfect shot!
SmartMount is the smallest and strongest way to attach an iPhone, Android or any camera phone up to 1/2" thick to a standard 1/4"-20 thread. This versatile little mount also doubles as a stand. It is built from black anodized aluminum and has soft pads that form a tight grip.
Cinetics V Wheels are designed to give you a smooth roll on the Cinetics SkateTrack and flat surfaces. Their innovative design provides a seamless connection with SkateTrack. Cinetics V Wheels are built to work with the CineMoco, enabling motorized control for time-lapse, stop motion animation, or video.